Documentation Center

  • Trial Software
  • Product Updates

Contents

我们为许可用户提供了部分翻译好的中文文档。您只需登录便可查阅这些文档

fopen (serial)

Connect serial port object to device

Syntax

fopen(obj)

Description

fopen(obj) connects the serial port object, obj to the device.

Examples

This example creates the serial port object s, connects s to the device using fopen, writes and reads text data, and then disconnects s from the device. This example works on a Windows® platform.

s = serial('COM1');
fopen(s)
fprintf(s,'*IDN?')
idn = fscanf(s);
fclose(s)

More About

expand all

Tips

Before you can perform a read or write operation, obj must be connected to the device with the fopen function. When obj is connected to the device:

  • Data remaining in the input buffer or the output buffer is flushed.

  • The Status property is set to open.

  • The BytesAvailable, ValuesReceived, ValuesSent, and BytesToOutput properties are set to 0.

An error is returned if you attempt to perform a read or write operation while obj is not connected to the device. You can connect only one serial port object to a given device.

Some properties are read-only while the serial port object is open (connected), and must be configured before using fopen. Examples include InputBufferSize and OutputBufferSize. Refer to the property reference pages to determine which properties have this constraint.

The values for some properties are verified only after obj is connected to the device. If any of these properties are incorrectly configured, then an error is returned when fopen is issued and obj is not connected to the device. Properties of this type include BaudRate, and are associated with device settings.

See Also

| | | | |

Was this topic helpful?