Documentation Center

  • Trial Software
  • Product Updates


Troubleshoot Task Overruns on PandaBoard Hardware

You can configure a model running on the target hardware to detect and notify you of when task overrun occurs.

Standard scheduling works well when a processor is moderately loaded but may fail if the processor becomes overloaded. When a task is required to perform extra processing and takes longer than normal to execute, it may be scheduled to execute before a previous instance of the same task has completed. The result is a task overrun.

To enable overrun detection:

  1. In your model, click Tools > Run on Target Hardware > Options.

  2. In the Run on Target Hardware pane that opens, select the Enable overrun detection check box.

  3. Click OK.

When a task overrun occurs, the command prompt on the host machine repeatedly prints an "Overrun" error message, such as "Overrun — rate for subrate task 1 is too fast", until the model stops.

To fix an overrun condition:

  • Simplify the model.

  • Increase the sample times for the model and the blocks in it. For example, change the Sample time parameter in all of your data source blocks, such as blocks for input devices, from 0.1 to 0.2.

    Note:   External mode increases the processing burden of the model running on your board. If the software reports an overrun, disable External mode.

Was this topic helpful?