Newsletters

  • 联系销售

Technical Articles

  • Teaching Nuclear Engineering with MATLAB

    Learn more
  • Simulating Trajectories for Remote Handling Vehicles

    Learn more
  • Winning the Cornell Cup with a Robotic Arm Exoskeleton

    Learn more

Filter all Articles

Results

   
Article Published
2014年3月
Using Trajectory Evaluator and Simulator software built with MATLAB, ITER researchers define paths for 100-ton vehicles carrying activated components through a building with just 30 centimeters of clearance between the vehicle and the walls.
2014年2月
As their fourth-year undergraduate capstone project, Penn students used MATLAB and Simulink to design and build Titan Arm, a controllable, wireless exoskeleton capable of lifting more than 40 pounds.
2014年1月
This article describes a workflow for building a component model from requirements, simulating the component model, and then connecting it to a system-level model for further simulation and testing.
2014年1月
A MATLAB and Simulink workflow for developing a desktop or lab dynamometer capable of running at lower DC bus voltages.
2013年12月
Using a wind turbine blade as an example, this article describes a semi-automated way to create complex 3D mechanical structures using MATLAB and the General Extrusion shape in SimMechanics.
2013年11月
Using industry-standard tools such as MATLAB and Simulink, and low-cost hardware such as Arduino, Beagleboard, LEGO MINDSTORMS, and Raspberry Pi, students tackle real engineering problems and acquire the skills they will need for careers in industry.
2013年10月
Third-party products help developers prototype and deploy human machine interface (HMI) applications with integrated graphics and multi-touch and voice input using Model-Based Design.
2013年10月
Engineers and scientists connect MATLAB and Simulink to FPGAs, microprocessors, cameras, instruments, and other hardware to design, test, and verify systems that combine hardware and software components.
2013年10月
A novel combination of the extended Kalman filter (EKF) algorithm, a two-RC-block equivalent circuit, and the coulomb counting method facilitates runtime SOC evaluation for commercial high-power LFP cells.
2013年4月
Use a layered approach to break the parameter estimation problem into a subset of data and parameter values so that the optimizer can focus on a specific problem.
2013年4月
Identify a plant model from input-output data, use the identified model to design a controller, and implement the controller on an embedded microprocessor.
2013年1月
This is a supplement to the article, "Motor Control with Arduino: A Case Study in Data-Driven Modeling and Control Design."
2013年1月
Use the Model Advisor exclusion capability to speed up verification of Simulink and Stateflow models.
2013年1月
An interview with a senior Simulink development team lead and an example showing how Simulink R2012b simplifies model navigation, simulation analysis, and model editing.
2013年1月
Using Simulink models and physical structures, Lehigh University researchers test reactions to seismic activity in ships’ hulls, bridge decks, shear walls, and four-story buildings.
2012年12月
This work employs a generative approach to optimization, where computational simulation of the problem space is combined with a computational optimization approach in the solution space.
2012年12月
2012年11月
Simulations in MATLAB and Simulink enable Johnson Matthey engineers to understand the complex interactions taking place within a catalyst, see which parameters most affect the output, and make design trade-offs based on the results.
2012年11月
From simulation and early verification to real-time testing, Model-Based Design results in shorter, less costly design cycles and helps designers create more robust, higher-performing control systems for motor control applications.
2012年10月
Third-party solutions enhance Model-Based Design for system engineering and embedded-system development in renewable energy applications.
2012年10月
Designing a control system for wind turbines with blade-pitch and power-electronic control, and optimizing parameter tuning for different electromechanical control functions.
2012年6月
NASA Langley’s MATLAB based control system fully automates the welding process and produces complex components from a 3D CAD representation.
2012年5月
By using Model-Based Design with Simulink, the team created a novel pump design and reduced development time by 50%.
2012年1月
Model-Based Design enables Hugo Petersen to cut costs and reduce development time by a factor of 5 to 10.
2012年1月
Developed in MATLAB, Sonarscope software lets researchers process, analyze, and visualize terabytes of raw MBES data.
2011年11月
Use simulation to design and verify complex control strategies in a model—then reuse the model to automatically generate IEC 61131 structured text to program the PLC for deployment.
2011年10月
Balance speed and accuracy by using Simscape to configure your model for real- time simulation.
2011年10月
Using an automotive CD player system as an example, this article demonstrates a workflow for verifying system behavior in the presence of communication latencies.
2010年12月
Modeling and simulation enable controls engineers to safely and cost-effectively optimize plant control systems, refine the control architecture, and tune individual loop performance.
2010年7月
Outlines the challenges involved in the manual translation from MATLAB to C, demonstrates how to use the Embedded MATLAB subset for automatic translation, and provides best practices for coding your MATLAB algorithm to improve the generated C code.
2009年11月
Using a do-while loop as an example, this article demonstrates how modeling design patterns can be used to generate efficient C code from algorithm models.
2009年9月
Using an aerospace system model as an example, this article describes the parallelization of a controller parameter tuning task using Parallel Computing Toolbox and Simulink Design Optimization.
2009年5月
Using a fault-tolerant fuel system model as an example, this article describes tools and a workflow for converting models from floating- to fixed-point for production code generation. The approach described uses two tools in Simulink Fixed Point.
2008年11月
Using a typical numerical computing problem as an example, this article describes how to threads and parallel for loops to get code to work well in a multicore system.
2008年9月
Article Reprint from The MathWorks News & Notes, 2008: MATLAB based algorithms translate the millions of drive files accumulated by test vehicles into reports on vehicle performance and refueling infrastructure.
2008年9月
Aerospace, automotive, communications, mechatronics and other organizations solve the challenge of verifying and validating embedded systems comprising software and electronics.
2008年9月
Using a thermal model of a house as an example, this article describes a methodology for communicating with other devices via TCP/IP using inexpensive external hardware. The real-time system used is xPC Target.
2008年7月
This article describes methods for modeling and simulating continuous and hybrid continuous-locking mechanical friction using Simulink, Simscape, SimDriveline, and SimMechanics. It is co-authored by Caterpillar and The MathWorks.
2008年5月
Engineers used Model-Based Design and rapid prototyping to build and test a controller before the fuel cell plant was available.
2007年6月
Using MATLAB based fluid dynamics models, engineers simulated the airflow through all 154 kilometers of tunnels and shafts simultaneously.
2007年6月
Researchers at the University of Michigan–Dearborn study the feasibility of using plug-in series hybrid technology to extend the range of electric vehicles.
2007年4月
A MATLAB based monitoring tool lets hydrologists and ecologists use time series models to collect and interpret groundwater data.
2006年10月

Receive the latest MATLAB and Simulink technical articles.

Related Resources

Latest Blogs