Error during contour plot

28 次查看（过去 30 天）
Rahul
Rahul 2024-4-5，16:12
评论： Rahul 2024-4-6，12:50
Hi,
While trying to generate a contour plot, I'm getting an error which is thown as
"The size of X must match the size of Z or the number of columns of Z."
while the size of my X (i.e. H0) and Z (i.e. I0) is same, I can't find why is the error thrown.
rowx1 = 1;
rowx2 = 100;
rowt1 = 1;
rowt2 = 100;
xstep = 100;
tstep = 100;
X_pedped = zeros(tstep,xstep);
Time = data.variable.t(1,rowt1:rowt2);
gP = data.variable.gradpressure(end,:);
Normalized_pressure_gradient = gP./abs(min(gP));
x = data.variable.x(1,rowx1:rowx2);
for i = 1:length(data.variable.x)-1
percentage_difference_gP(i) = abs(Normalized_pressure_gradient(end,i+1)-Normalized_pressure_gradient(end,i))*200/abs(Normalized_pressure_gradient(end,i+1)+Normalized_pressure_gradient(end,i));
end
for i = 2:rowx2
if abs((2*abs(gP(i-1)-gP(i))/(gP(i-1)+gP(i)))*100) > 90
X_pedped(i) = gP(i);
end
end
Index_ped = find(X_pedped~=0);
gPressure_ped = abs(data.variable.gradpressure(rowt1:rowt2));
Pressure_ped = abs(data.variable.pressure(rowt1:rowt2));
Density_ped = abs(data.variable.density(rowt1:rowt2));
turbulenceintensity_ped = abs(data.variable.turbulenceintensity(rowt1:rowt2));
Pressure_cen = abs(data.variable.pressure(rowt1:rowt2,1));
Density_cen = abs(data.variable.density(rowt1:rowt2,1));
turbulenceintensity_cen = abs(data.variable.turbulenceintensity(rowt1:rowt2,1));
for i = rowt1:rowt2
Flowshear_p(i-rowt1+1,1) = mean(abs(data.variable.wexb_p(i,1:end)));
Flowshear_n(i-rowt1+1,1) = mean(abs(data.variable.wexb_n(i,1:end)));
end
Y=0;
tstep = rowt2-rowt1+1;
tmax=Time(end)-Time(1);
T=tmax/tstep;
Fs= 1/T;
p_cen = Pressure_cen;
Y = fftshift(fft(p_cen));
%Y1=fft(p_cen);
L = length(Y);
Ynew = 2*abs(Y(2:length(Y)/2-1)/L);
f = Fs*(0:L/2-3)/L;
Ynew_NA = Ynew/max(Ynew);
[value, index] = max(Ynew(:,1));
Frequency = f(1,index);
for j = 2:rowt2
if j < rowt2
if Pressure_cen(j-1) < Pressure_cen(j) && Pressure_cen(j) > Pressure_cen(j+1)
Pressure_ped_MAX(j) = Pressure_ped(j);
Density_ped_MAX(j) = Density_ped(j);
turbulenceintensity_ped_MAX(j) = turbulenceintensity_ped(j);
Flowshear_p_MAX(j) = Flowshear_p(j);
Flowshear_n_MAX(j) = Flowshear_n(j);
Pressure_cen_MAX(j) = Pressure_cen(j);
Density_cen_MAX(j) = Density_cen(j);
turbulenceintensity_cen_MAX(j) = turbulenceintensity_cen(j);
Time_MAX(j) = Time(j);
end
if gPressure_ped(j-1) < gPressure_ped(j) && gPressure_ped(j) > gPressure_ped(j+1)
gPressure_ped_MAX(j) = gPressure_ped(j);
end
if Pressure_cen(j-1) > Pressure_cen(j) && Pressure_cen(j) < Pressure_cen(j+1)
Pressure_ped_MIN(j) = Pressure_ped(j);
Density_ped_MIN(j) = Density_ped(j);
turbulenceintensity_ped_MIN(j) = turbulenceintensity_ped(j);
Flowshear_p_MIN(j) = Flowshear_p(j);
Flowshear_n_MIN(j) = Flowshear_n(j);
gPressure_ped_MIN(j) = gPressure_ped(j);
Pressure_cen_MIN(j) = Pressure_cen(j);
Density_cen_MIN(j) = Density_cen(j);
turbulenceintensity_cen_MIN(j) = turbulenceintensity_cen(j);
Time_MIN(j) = Time(j);
end
if gPressure_ped(j-1) > gPressure_ped(j) && gPressure_ped(j) < gPressure_ped(j+1)
gPressure_ped_MIN(j) = gPressure_ped(j);
end
end
end
%---------------------------- data calculation ----------------------------
check_Hmode_percentage_difference_gP = max(percentage_difference_gP);
Avg_Pressure_ped = mean(Pressure_ped);
Avg_Density_ped = mean(Density_ped);
Avg_turbulenceintensity_ped = mean(turbulenceintensity_ped);
Avg_Pressure_cen = mean(Pressure_cen);
Avg_Density_cen = mean(Density_cen);
Avg_turbulenceintensity_cen = mean(turbulenceintensity_cen);
Avg_Flowshear_p = mean(Flowshear_p);
Avg_Flowshear_n = mean(Flowshear_n);
H0 = abs(data.constant.H0);
S0 = abs(data.constant.S0);
Chi0 = abs(data.constant.chi0);
Chi1 = abs(data.constant.chi1);
D0 = abs(data.constant.D0);
D1 = abs(data.constant.D1);
H0_12bi_024 = [Avg_Pressure_ped Avg_Density_ped Avg_turbulenceintensity_ped; Avg_Pressure_cen Avg_Density_cen Avg_turbulenceintensity_cen;
H0 S0 Chi0 ; Chi1 D0 D1;Avg_Flowshear_p Avg_Flowshear_n 0 ];
%-------------------------------Contour data H0 vs I0-------------------------------------
H0I0_Pressure_cen = [H0_27bi_001(2,1) H0_27bi_002(2,1) H0_27bi_003(2,1) H0_27bi_004(2,1) H0_27bi_005(2,1) H0_27bi_006(2,1) H0_27bi_007(2,1) H0_04bi_008(2,1);
H0_01bi_009(2,1) H0_01bi_010(2,1) H0_02bi_011(2,1) H0_03bi_012(2,1) H0_04bi_013(2,1) H0_05bi_014(2,1) H0_12bi_015(2,1) H0_12bi_016(2,1);
H0_15bi_017(2,1) H0_17bi_018(2,1) H0_21bi_019(2,1) H0_12bi_020(2,1) H0_12bi_021(2,1) H0_12bi_022(2,1) H0_12bi_023(2,1) H0_12bi_024(2,1)];
H0I0_Density_cen = [H0_27bi_001(2,2) H0_27bi_002(2,2) H0_27bi_003(2,2) H0_27bi_004(2,2) H0_27bi_005(2,2) H0_27bi_006(2,2) H0_27bi_007(2,2) H0_04bi_008(2,2);
H0_01bi_009(2,2) H0_01bi_010(2,2) H0_02bi_011(2,2) H0_03bi_012(2,2) H0_04bi_013(2,2) H0_05bi_014(2,2) H0_12bi_015(2,2) H0_12bi_016(2,2);
H0_15bi_017(2,2) H0_17bi_018(2,2) H0_21bi_019(2,2) H0_12bi_020(2,2) H0_12bi_021(2,2) H0_12bi_022(2,2) H0_12bi_023(2,2) H0_12bi_024(2,2)];
H0I0_Pressure_ped = [H0_27bi_001(1,1) H0_27bi_002(1,1) H0_27bi_003(1,1) H0_27bi_004(1,1) H0_27bi_005(1,1) H0_27bi_006(1,1) H0_27bi_007(1,1) H0_04bi_008(1,1);
H0_01bi_009(1,1) H0_01bi_010(1,1) H0_02bi_011(1,1) H0_03bi_012(1,1) H0_04bi_013(1,1) H0_05bi_014(1,1) H0_12bi_015(1,1) H0_12bi_016(1,1);
H0_15bi_017(1,1) H0_17bi_018(1,1) H0_21bi_019(1,1) H0_12bi_020(1,1) H0_12bi_021(1,1) H0_12bi_022(1,1) H0_12bi_023(1,1) H0_12bi_024(1,1)];
H0I0_Density_ped = [H0_27bi_001(1,2) H0_27bi_002(1,2) H0_27bi_003(1,2) H0_27bi_004(1,2) H0_27bi_005(1,2) H0_27bi_006(1,2) H0_27bi_007(1,2) H0_04bi_008(1,2);
H0_01bi_009(1,2) H0_01bi_010(1,2) H0_02bi_011(1,2) H0_03bi_012(1,2) H0_04bi_013(1,2) H0_05bi_014(1,2) H0_12bi_015(1,2) H0_12bi_016(1,2);
H0_15bi_017(1,2) H0_17bi_018(1,2) H0_21bi_019(1,2) H0_12bi_020(1,2) H0_12bi_021(1,2) H0_12bi_022(1,2) H0_12bi_023(1,2) H0_12bi_024(1,2)];
H0I0_Pressure_cen2 = smoothdata(H0I0_Pressure_cen); % adapt the smoothing amount to your needs...
H0I0_Density_cen2 = smoothdata(H0I0_Density_cen); % adapt the smoothing amount to your needs...
H0I0_Pressure_ped2 = smoothdata(H0I0_Pressure_ped); % adapt the smoothing amount to your needs...
H0I0_Density_ped2 = smoothdata(H0I0_Density_ped); % adapt the smoothing amount to your needs...
H00 = 4:1:13;
I00 = 7:-0.5:5;
[H0,I0] = meshgrid(H00,I00);
contourf(H0,I0,H0I0_Pressure_cen2,1000,'edgecolor','none')
colormap(jet);
colorbar;
Attached is the code and data file.
rgds
  1 个评论
Star Strider
Star Strider 2024-4-5，17:28
Please describe what you want to do. Most of the fileds in ‘data.variable’ are (100x100) matrices, so they would be usable in a contour plot. None of the variables after the ‘Contour data H0 vs I0’ comment are defined in your posted code.

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Walter Roberson
Walter Roberson 2024-4-5，17:22

the first parameter to contourf is the x data, which corresponds to columns. the second parameter to contourf is y data which corresponds to rows

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Contour Plots 的更多信息

标签

产品


版本

R2023a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by