Random graph showing up on my GUI?

Question

Amed 2013-2-14

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/63386-random-graph-showing-up-on-my-gui

回答： Alan Hidalgo 2017-1-25

Hello. Can someone please point to me why my GUI background turns into a plot graph while trying to run accelerometer data? Here is the only button it occurs on

% --- Executes on button press in Read.
function Read_Callback(hObject, eventdata, handles)
% hObject    handle to Read (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
%COMPORT
comPort = '/dev/tty.usbmodemfa131';
%READS SERIAL
 [accelerometer.s,serialFlag] = setupSerial(comPort);
    calCo = calibrate(accelerometer.s);
%READS DATA
a = 0;
if a == 0
[gx gy gz] = readAcc(accelerometer,calCo);
cla;
r = sqrt((gx^2)+(gy^2)+(gz^2));
r
end
guidata(hObject, handles);

4 个评论
显示 2更早的评论隐藏 2更早的评论

Amed 2013-2-14

help

Amed 2013-2-14

anything

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Image Analyst 2013-2-14

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/63386-random-graph-showing-up-on-my-gui#answer_74991

Are you sure you didn't place a gigantic axes control behind all your other controls on your GUI? And then somehow (not shown here) you plot something to it? What gets plotted? Is it anything you recognize?

3 个评论
显示 1更早的评论隐藏 1更早的评论

Amed 2013-2-14

在 MATLAB Online 中打开

There is nothing getting plotted. Every time I attempt to read data using that code, my background changes into a plot.. here is the entire code for further analysis

function varargout = iMeasureFIG(varargin)
gui_Singleton = 1;
gui_State = struct('gui_Name',       mfilename, ...
                   'gui_Singleton',  gui_Singleton, ...
                   'gui_OpeningFcn', @iMeasureFIG_OpeningFcn, ...
                   'gui_OutputFcn',  @iMeasureFIG_OutputFcn, ...
                   'gui_LayoutFcn',  [] , ...
                   'gui_Callback',   []);
if nargin && ischar(varargin{1})
    gui_State.gui_Callback = str2func(varargin{1});
end
if nargout
    [varargout{1:nargout}] = gui_mainfcn(gui_State, varargin{:});
else
    gui_mainfcn(gui_State, varargin{:});
end
% ~~~~~~~~~ OPENING / OUTPUT FUNCTIONS ~~~~~~~~~ %
% --- Executes just before BW2 is made visible.
function iMeasureFIG_OpeningFcn(hObject, eventdata, handles, varargin)
handles.output = hObject;
guidata(hObject, handles);
setappdata(handles.ClosePush, 'Close', 0);
% --- Outputs from this function are returned to the command line.
function varargout = iMeasureFIG_OutputFcn(hObject, eventdata, handles) 
varargout{1} = handles.output;
% ~~~~~~~~~ SERIALPUSH SETUP ~~~~~~~~~ %
function [s,flag] = setupSerial(comPort)
% Initialize the serialpush port communication between Arduino and MATLAB
% The input value is the COMPORT should be changed as per requirement
% We ensure that the arduino is also communicatiing with MATLAB at this
% time. A predefined code on the arduino acknowledges this. 
% if setup is complete then the value of setup is returned as 1 else 0
flag = 1;
s = serial(comPort);
set(s,'DataBits', 8 );
set(s,'StopBits', 1 );
set(s,'BaudRate', 9600);
set(s,'Parity', 'none'); 
fopen(s);
a='b';
while (a ~='a')
    a=fread(s,1,'uchar');
end
if (a=='a')
    disp('serial read');
end
  fprintf(s,'%c','a'); 
  mbox = msgbox('Serial Communication setup.'); uiwait(mbox);
  fscanf(s,'%u');
% ~~~~~~~~~ CALIBRATION SETUP ~~~~~~~~~ %
function calCo= calibrate(s)
    out.s=s;
    calCo.offset=0;
    calCo.g=1;
      %readpush the raw accelerometer output at three different orientations
      mbox = msgbox('Lay accelerometer on a flat surface.', 'Calibration'); uiwait(mbox);
      [gx_z gy_z gz_z] = readAcc(out,calCo);   %gZ = 1, gX = gY = 0 orientation
      mbox = msgbox('Stand accelerometer on edge so that X arrow points up.', 'Calibration'); uiwait(mbox); 
      [gx_x gy_x gz_x] = readAcc(out,calCo);   %gX = 1, gY = gZ = 0 orientation
      mbox = msgbox('Stand accelerometer on edge so that Y arrow points up.', 'Calibration'); uiwait(mbox);
      [gx_y gy_y gz_y] = readAcc(out,calCo);   %gY = 1, gX = gZ = 0 orientation
      %calculate offsets for each axis
      offsetX = (gx_z + gx_y) / 2;
      offsetY = (gy_x + gy_z) / 2;
      offsetZ = (gz_x + gz_y) / 2;
      %calculate scaling factors
      gainX = gx_x - offsetX;
      gainY = gy_y - offsetY;
      gainZ = gz_z - offsetZ;
      calCo.offset = [offsetX offsetY offsetZ];
      calCo.g = [gainX gainY gainZ];
      mbox = msgbox('Sensor calibration complete'); uiwait(mbox);
% ~~~~~~~~~ READACC SETUP ~~~~~~~~~ %
 function [gx gy gz] = readAcc(out,calCo)
          %mapping between analog inputs and X,Y,Z axes.
  %         Xch = 1;
  %         Ych = 3;
  %         Zch = 2;
          fprintf(out.s,'R');
          %readpush voltages from accelerometer and reorder
          reordered(1)= fscanf(out.s,'%u');
          reordered(2)= fscanf(out.s,'%u');
          reordered(3)= fscanf(out.s,'%u');
          %determine what offset and gain values to use
          offset = calCo.offset;
          gain = calCo.g;
          accel = (reordered - offset) ./ gain;
          %map analog inputs to axes
          gx = accel(1);
          gy = accel(2);
          gz = accel(3);
% ~~~~~~~~~ SERIALPUSH READPUSH ~~~~~~~~~ %
function SerialPush_Callback(hObject, eventdata, handles)
handles.comPort = '/dev/tty.usbmodemfa131';
if (~exist('serialFlag','var'))
    [handles.accelerometer.s,handles.serialFlag] = ...
        setupSerial(handles.comPort);
end
guidata(hObject, handles);
% ~~~~~~~~~ CALIBRATION ~~~~~~~~~ %
function CalibratePush_Callback(hObject, eventdata, handles)
if(~exist('handles.calCo', 'var'))
    handles.calCo = calibrate(handles.accelerometer.s);
end
guidata(hObject, handles);
% ~~~~~~~~~ CLOSEPUSH SERIALPUSH ~~~~~~~~~ %
function ClosePush_Callback(hObject, eventdata, handles)
% hObject    handle to ClosePush (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
setappdata(handles.ClosePush, 'Close', 1);
clc
clear all
if ~isempty(instrfind)
    fclose(instrfind);
    delete(instrfind);
end
close all
clc
disp('Serial Port Closed')
% --- Executes on button press in ReadPush.
function ReadPush_Callback(hObject, eventdata, handles)
% hObject    handle to ReadPush (see GCBO)
% eventdata  reserved - to be defined in a future version of MATLAB
% handles    structure with handles and user data (see GUIDATA)
%COMPORT
comPort = '/dev/tty.usbmodemfa131';
%READS SERIALPUSH
 [accelerometer.s,serialFlag] = setupSerial(comPort);
    calCo = calibrate(accelerometer.s);
%READS DATA
while getappdata(handles.ClosePush,'Close') == 0
[gx gy gz] = readAcc(accelerometer,calCo);
cla;
r = sqrt((gx^2)+(gy^2)+(gz^2));
gz
end
guidata(hObject, handles);

Amed 2013-2-14

so lost

Image Analyst 2013-2-14

I can't run it without the fig file. Upload it and the m-file somewhere and tell us where.

请先登录，再进行评论。

Answer 2

Alan Hidalgo 2017-1-25

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/63386-random-graph-showing-up-on-my-gui#answer_252018

Hey Amed, I had the same issue with a realtime plot in which I had to open another Gui. Whenever I opened the other Gui, its background had the realtime plot on it too. I have no idea how to fix this with code, I just edited the second Gui and made a much bigger textbox that would cover up the entire frame of the Gui and it did the trick, the graph is no longer visible where it must not. You should give it a try.